Join the DIY revolution and get your own personal army of electronics with the UNO R3 at the heart and command center of your electronic force.
This our UNO R3 Master Starter Kit for Arduino. Includes 60+ different parts, over 100 separate components and unlimited projects with many types of sensors and other goodies in one plug-and-play kit. Wether you are a beginner or already have experience with Arduino under your belt, this kit will be a fun way to expand your knowledge.
Everything included is this kit are standard easy to use plug-and-play components. All you have to do is plug it in, upload the code and start having some fun.
We provide tech support as well so don’t be shy to send us a message for some help.
Here’s the link to our PDF tutorial handbook for some guidance.
Proper one-day handling and ultra quick shipping from Wichita, Kansas USA-our location in the center of US continent guarantees shipping to anywhere in the US in above average time (usually 3 days).
1x Generic Arduino-Compatible UNO R3 + USB Cable (Tested and Working with Arduino IDE!)
1x UNO R3 Protoshield + Solderless Breadboard (Goes On Top of Protoshield)
1x 720-Point Large Solderless Breadboard
65x Male-Male Breadboard Jumper Wires
40x Male-Female Jumper Wires
1x 40-Pin 2.54MM Male Angled header
1x 40-Pin 2.54MM Male Straight header
5x 5mm Bright White LED
5x 5mm Bright Red LED
5x 5mm Bright Green LED
5x 5mm Bright Blue LED
5x Signal Red LED
5x Signal Yellow LED
5x Signal Green LED
5x 5mm RGB (Red, Green, Blue) LED
10x 220 Ohm Carbon Film 5% Resistor
10x 1k Ohm Carbon Film 5% Resistor
10x 10k Ohm Carbon Film 5% Resistor
2x 1k Large Rotary Potentiometer
2x 10k Larger Rotary Potentiometer
1x 74HC595 Shift Register
1x 2N3904 NPN Small Transistor
1x TIP122 Power Transistor
1x IRFZ44NPBF MOSFET
1x 5V DC Stepper Motor + ULN2003 Driver Board (Easy Plug and Go)
1x 5V DC Toy Hobby Motor
1x 9g Tower Pro Servo + Servo Arms and Skrews
1x 1602 LCD Display w/ Blue Backlight HD44780
1x One Digit Digital LED Display
1x Four Digit Digital LED Display w/ I2C
1x DS3231 I2C Real Time Clock (LIR2032 Rechargable Battery Included)
1x MAX7219 8×8 Red Dot Matrix (Easy to Use)
1x DHT11 Temperature and Humidity Sensor
1x Rain + Snow Level Sensor (Sensor + PCB Module + Jumper Cables)
1x HC-SR501 Motion Sensor
1x HC-SR04 Ultrasonic Sensor
1x Sound Sensor (Sound Detection Module and Mic)
1x RC522 RFID Card System
1x TCS230 Color Sensor
1x Hall Effect Sensor
1x PS2 Joystick Controller
1x 5V Relay (0-220V AC and DC at 30A)
1x TV Remote Control Kit (Remote + IR Receiver)
1x Flame Sensor (Infrared Photo Transistor)
1x 3V 650nm Red Dot Laser Diode
1x MQ3 Alcohol Sensor Module (Sensor on the PCB, all you need is jumper wires)
1x MQ9 Gas Sensor Module (Sensor on the PCB, all you need is jumper wires)
1x GY68 BMP Pressure Sensor
1x GY271 Magnetic Field Sensor and Compass
1x GY521 3-Axis Gyro and Accelerometer
1x ESP8266 Wifi Transceiver 802.11 bgn
1x 1-Key Capacitive Touch Sensor
1x TTP229 16 Button Capacitive Touch Sensor
1x Soil Moisture Sensor and Hygrometer (PCB module included)
1x ISD820 Voice Recording and Playback Module
1x Ball/Tilt Angle Switch
1x Piezo Buzzer
5x Small Tactile Push Buttons (Breadboard Friendly)
2x Large Blue Tactile Push Buttons (Breadboard Friendly)
1x 9V Battery Connector and Jack
Notes for the UNO board:
The bootloader is already burned onto the chip so it works right out of the box in 95% of cases, just plug it in! For the other 5% install the driver located at http://www.arduined.eu/ch340g-converter-windows-7-driver-download/. Or http://kiguino.moos.io/2014/12/31/how-to-use-arduino-nano-mini-pro-with-CH340G-on-mac-osx-yosemite.html for mac.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
2404 Skinner St, 67211, Wichita, Kansas, USA.
Please remember to ensure that the item you are returning is repackaged with all elements.