UNO R3 Standard Starter Kit for Arduino
Everything you need to get started on learning Arduino type stuff. Includes a clone UNO R3 board, 1602 blue LCD, servos, motors, sensors and other goodies.
In stockEmail to a friend
Join the DIY revolution with our UNO R3 Standard Starter Kit for Arduino. This is our flagship kit is for beginners and advanced users. Over 40 different parts and modules to play with and try some cool ideas. Everything you need to get started if you want to get into DIY electronics and Arduino.
Most parts in this kit is plug-and-play and requires 6 wires or less to connect. Combined with the tutorial handbook, it will be very easy for a beginner to learn Arduino and using the modules.
Check out our tutorial handbook for anyone who needs some guidance.
1x Generic Arduino-Compatible UNO R3 (Tested and Working!)
1x Prototyping Shield + Small Solder-less Breadboard (Goes On Top of Prototyping Shield)
1x 720-Point Large Solderless Breadboard
65x Male-Male Breadboard Jumper Wires
40x Male-Female Jumper Wires
1x 40-Pin 2.54MM Male Angled header
1x 40-Pin 2.54MM Male Straight header
5x 5mm Bright White LED
5x 5mm Bright Red LED
5x 5mm Bright Green LED
5x 5mm Bright Blue LED
5x 5mm Bright Yellow LED
5x Signal Red LED
5x Signal Yellow LED
5x Signal Green LED
5x 5mm RGB (Red, Green, Blue) LED
2x 3-Pin Slider On-Off Swithces
25x 220 Ohm Carbon Film 5% Resistors
10x 1k Ohm Carbon Film 5% Resistors
10x 10k Ohm Carbon Film 5% Resistors
2x 1k Large Rotary Potentiometer
2x 10k Larger Rotary Potentiometer
1x 74HC595 Shift Register
1x 2N3904 NPN Small Transistor
1x TIP122 Power Transistor
1x 5V DC Stepper Motor + ULN2003 Driver Board (Easy Plug and Go)
1x 5V DC Toy Hobby Motor
1x 9g Tower Pro Servo + Servo Arms and Skrews
1x 1602 LCD Display w/ Blue Backlight HD44780
1x One Digit Digital LED Display
1x Four Digit Digital LED Display w/ I2C TM1637
1x HC-SR04 Ultrasonic Range Sensor
1x DHT11 Temperature and Humidity Sensor
1x MAX7219 8×8 Red Dot Matrix (Easy to Use)
1x Sound Sensor (Sound Detection Module)
1x PS2 Joystick
1x DS3231 High Precision Clock w/ I2C (LIR2032 Rechargable Battery Included)
1x 5V 1-Channel Relay
1x TV Remote (IR)
1x IR reciever
1x Infrared Photo Transistor (Flame Sensor)
1x Ball/Tilt Angle Switch
1x 5V Piezo Buzzer
5x Small Push Buttons (Breadboard Friendly)
1x 9V Battery Connector and Jack
2x 0.1uF Ceramic Disk Capacitor
Notes for the UNO board:
The bootloader is already burned onto the chip so it works right out of the box in 95% of cases, just plug it in! For the other 5% install the driver located at http://www.arduined.eu/ch340g-converter-windows-7-driver-download/. Or http://kiguino.moos.io/2014/12/31/how-to-use-arduino-nano-mini-pro-with-CH340G-on-mac-osx-yosemite.html for mac.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
2404 Skinner St, 67211, Wichita, Kansas, USA.
Please remember to ensure that the item you are returning is repackaged with all elements.